Saturday, May 31, 2014

Differences of Opinion (Fits With Shims)

"My saddle fits every horse I put it on!"

If there's a phrase that triggers my eye-roll reflex, it's this one.  Any guesses as to how many times I hear this?

Let's just say, "Lots."

And guess what?

It doesn't.

Ok, so maybe my definition of "fit" is a bit different than the average person's.  I want a saddle to fit correctly without having to use anything other than a thin cotton pad.  No shims, no sheepskins, no foam, no air, no foregirth - just a thin cotton quilt.  It can't slide forward or slip back, or wobble from side to side, and it  has to allow the horse and rider to do their jobs effortlessly.

The last time someone told me this, she put a thin cotton quilt on the horse, then added a thick sheepskin pad, then a foam pad, and finally a rear riser pad before placing said miracle saddle on top of it all.  She climbed aboard and perched up there, commenting, "I have to be really careful about maintaining my balance, but look how well it's fitting!"

Frankly, when you get that much padding between you and the horse, "saddle fit" becomes a moot point.   It's like a person who's a size 4 trying to make a pair of size 10 pants fit by wearing multiple pairs of long underwear, or someone with a size 8 foot trying to make a size 6 shoe fit by lopping off the toes.  While you may be able to make said clothing work, you really can't say it fits.  Throwing multiple pads under a saddle isn't making it fit, it's just putting more junk between your saddle and your horse.

Yes, there are saddles like the Balance and the Parelli that are supposed to be shimmed, and while I understand the theory, I'm still firmly of the opinion that a saddle that truly fits doesn't require the use of shim pads.  They talk about focusing on active fit rather than static fit, and I'm on board with that ... but I still think that can be achieved without shims or corrective pads.  They talk about the way a horse's back changes when they work, and how a saddle needs to allow for that.  Again, I'm all over that ... but it can be done without extra pads/shims.

Now, I understand that some people need to make a saddle work for more than one horse, and I understand that there are horses that, for various physical reasons, do require shims and/or pads as a band-aid.  I'm ok with that.  I use shim pads from time to time myself, when horses are in transition; it's a boat load cheaper than repeated flocking adjustments, it's far more convenient, and it can save the integrity of the flock.  It's also a good answer if you're trying to fit two similar horses with one saddle, and while it's a good fit for Horse A, it's just a tad too wide in the tree for Horse B.

Anyone who's read much of this blog will understand that if a saddle truly doesn't fit, there's no pad in the world that will make it fit.  That same anyone will also understand that it's my belief that there's no one saddle that can be adjusted to fit every horse perfectly throughout its lifetime.  (Even the WOW saddles, which are completely modular and can have the panels and even the tree changed out, fall into this category.  If you're switching out the tree and the panels, you're essentially building a completely new saddle, aren't you?)  And that Miracle Saddle that fits every horse perfectly only exists in Brigadoon, sitting in the pot of gold at the end of the rainbow, with all the honest politicians.




Sunday, May 11, 2014

A Word About Widths

"My saddle fitter said my horse needs a wide tree.  So I got her one, but it sits too low and hits her withers."  "My saddle fitter said my horse needs a medium tree.  So I got her one, but the saddle is sitting really pommel-high."  "My saddle fitter said that because my horse has really big withers, he'll need a narrow tree."

I hear this sort of thing way more frequently than I'd like.  Tree width is the very first thing most people think about when they talk about saddle fitting, yet many people don't understand that it's only one part of the fitting picture.  Yes, the correct tree width is important, but tree type, tree shape, panel configuration and billet configuration are equally important, and all but the last have an effect on width.  But people always start with, "My horse needs a medium/wide/narrow/extra-wide tree ..."

So let's break this down.  First, whether a tree is given a designation like medium or wide, or whether it's given a centimeter measurement, the measurement is taken pre-construction, on the bare tree.  If the tree is measured in centimeters, the measurement is taken between the ends of the tree point.  If it's a UK-made saddle, it's given its width designation based on the angle of the pommel arch, as follows:


  • Narrow:  75°-84.9°
  • Medium:  85° - 94.9°
  • Wide:  95° - 104.9°
  • Extra-wide:  105° and up
So, all medium tree saddles made in the UK are the same in the width department, right?

No.

Why not?

Reason one:  Tree type.  If a saddle is a wide standard tree, it's not going to fit the same as a wide hoop tree, since the hoop tree has the extra breadth across the top of the pommel arch.

Reason two:  Head height.  A medium width high-head saddle may work beautifully for a higher-withered horse, but will probably perch on a horse with a lower wither.

Reason three:  Tree point length.  Long tree points fit less generously than short tree points.  In the graphic below, the ends of the "tree points" are the same width apart, but note how much more room there is with a shorter point.


Reason four:  Panel configuration.  A wither or full front gusset will reduce a saddle's width.  A K or trapezius-type panel, which can be a lifesaver on a horse with divots behind the withers or real "steeple" withers, can make a saddle perch on a propane-tank back.  Where the panels are sewn into the pommel arch makes a difference, too; that's why Passier's Freedom panels (which are sewn in lower in the pommel arch than their standard panels) are a good choice for a horse with a lower, muttony wither.  (I rode the Great Red Menace in a Passier GG for years; she wasn't quite a hoop tree candidate but was broader than a regular tree would easily accommodate, and this "compromise"- especially in conjunction with the shorter tree points on the Passier - worked well until she got older and widened into a real hoop tree horse.)  Horses with bigger withers often need the panels to be tied in higher in the pommel arch (but not so high that they press on the lateral aspect of the spine).


Reason five:  What's in the panels.  Foam panels are thinner than wool panels because they have better cushion; an inch of foam offers much more cushion than an inch of wool.  Foam panels offer a closer "feel" but don't usually offer much in the way of panel modifications (though some saddle companies, like Beval, are starting to pay more attention in this area).  I don't think they're usually a good choice for a horse with a big wither, since the panels are often too minimal to support the saddle in proper balance on a horse with that conformation. These panels can work well on the table-backs, though; Andy Foster's Lauriche saddles are all foam-paneled, and I've seen many of them work beautifully for the propane-tank builds.

Wool panels, on the other hand, are bulkier, and the amount of flocking in the panels can make a pretty substantial difference in the way a saddle fits.  A saddle that's been heavily flocked in the front will not fit as generously in width as a saddle that's been more lightly flocked ...but as we learned in the previous blog post, you can't go to the other extreme, either.  There must be enough wool in the panels to cushion the horse's back from the tree, but not so much that the panels are distorted into leather-covered sausages.

So the next time you're saddle shopping, remember that correct tree width is vital, but that these variables will make it almost impossible to say with any assurance, "My horse needs a ______ tree."

Saturday, April 12, 2014

Put the Irons Down (Location, Location, Location)

PUT THE IRONS DOWN

Recently, I received a saddle from a lovely woman I had worked with in my previous saddle fitting life.  I'd sold her her saddle (long-distance), and adjusted it regularly for her (again, long-distance) whenever it needed attention, and things had always gone well.  The last time the saddle had needed attention, however, she didn't know I'd started my own business, and wound up working long-distance with another fitter.  She sent fitting evaluation photos, and the other fitter said the saddle was sitting pommel-high, but the issue could be resolved by removing flocking from the front.  So Customer sends her saddle in and has the work done.  When she gets the saddle back and tries it the first time, her mare is reluctant to move forward.  Eventually, the mare just flat refuses to move forward when saddled.  So Customer finds me via Google, emails, and asks if I'd take a look.

I also ask for fitting evaluation photos.  When they arrive, I see that yes, the saddle's sitting pommel-high ... but it's also positioned too far forward.  This conversation ensues:

ME:  Are these the same photo you sent to the other fitter?

CUSTOMER:  Yes.

M:  Did the other fitter say anything about where the saddle was sitting?

C:  No, she just said the saddle was sitting pommel-high, and that taking some flocking out of the front would fix it.

M:  Well, it is sitting pommel-high, but I think it's sitting that way because it's about two fingers' width too far forward.

C:  Oh ... Why didn't the other fitter mention that?

M:  Not sure.  Perhaps she didn't notice.  But go ahead and send your saddle and a template.  I'm sure I can straighten things out.

Now, let me pause to say that taking flocking out of a saddle is a miserable bitch of a job, not one I enjoy in the least and one I will run uphill to avoid unless there's no other recourse.  To say that it's hard to do well is a huge understatement.  Fortunately, it's rare that I have to do it unless the saddle is grossly overflocked, and in that case, a total strip-flock is usually needed (and in that case, I don't mind removing flocking at all).  Sometimes taking a whisker of wool out can improve things, but if a saddle's sitting pommel-high (at least, if it's doing so when the saddle's in the right spot), I've found that it's rarely the correct fix.  And taking flocking out when the wool has compacted tightly isn't what I'd call a good idea, as it's going to be hard to remove wool without getting into the bedding layer (the one closest to your horse, which shouldn't be disturbed when adjusting the flock).  Finally, doing so on a serge-paneled saddle, which will allow every lump, bump, divot and deviation to be felt minutely ... well, that's really, REALLY not a good idea.

So the saddle arrives, I prop it in my lap and do the ritual-habitual touchy-feelie of the panels. There are huge divots in the panels that start at the tree points and go back past the stirrup bars; the other fitter must have removed WADS of flock.  So much has been removed that I can literally (and I do mean "literally") feel the tree through the panels.  What little flocking is left in the area is balled up and lumpy - no WONDER the poor mare didn't want to move!  If I can feel the tree, what must it have been like for her with her rider up?

I cannot believe that anyone who calls themselves a fitter would think this was a good job or the right solution.  I am flabbergasted.  I am gobsmacked.  I am mad.  I compare the tree width to the template that Customer sent, and they match up perfectly.  So the whole "pommel high" thing wasn't about saddle fit - it was about saddle position. One of the most basic things a fitter should check. 

I put the saddle on my bench and head for the computer, being very raptor-y and snarling and swearing a blue streak about people who have no business working on saddles and how I hope they one day have to carry a backpack full of rocks and razor blades on a 30 mile forced march, uphill both ways, on the hottest day of the year, barefoot, in snow up to their hips; how they give saddle fitters in general and long-distance fitters in particular an undeserved collective black eye, and how they can't go out of business quickly enough to suit me.  Then, thinking perhaps I should decompress and regain my ability to be diplomatic (to "channel Edie", as Nancy Okun and I call it) before contacting the customer, I do an about-face and spend some time kicking and punching my stand-up bag.  Venting such wrath on Mister Squishy would have undoubtedly led to his demise, given his elderly and fragile state.

Feeling much more in control (and considerably winded; my stamina still isn't back to pre-flu levels), I let Customer know about the state of the saddle, and tell her that a strip-flock may be in the cards.  Customer feels really bad; she was trying to do the right thing by her horse and is now worried she's hurt her horse and that her saddle may be beyond fixing.  I assure her that her saddle can be fixed, please don't worry; if I can avoid doing a strip-flock, I will, and I'll let her know about it asap.

I spend a while longer poking at the panels and cursing.  Part of me thinks a strip-flock is the way to go; the saddle's about 6 years old and it would just flat be easier to start over than to try to fill in those holes.  But Customer had to pay a fairly steep price to have this done to her saddle, so I'd like to at least be able to spare her as much financial outlay as possible. But man, that's an unholy, wicked mess ... Yet the rest of the flocking is still in good shape, so it would be a shame to have to pull it all out ...

In the end, I decide to see if I can fix it.  If I fail, I can always fall back on the strip flock.  So I start fiddling and adding wool and using a long needle to go into the panels through the serge and break up lumps.  After about 15 minutes, I'm pleased (and frankly, pretty surprised) to find that one panel is back in good shape, so I start on the other.  More fiddling, more poking with the needle, a little massaging and fluffing, and the second panel is feeling way better.  In all, I spent better than half an hour on the saddle (a regular flocking adjustment rarely takes more than 10 minutes).  I do a few final adjustments and decided to let the wool "rest" overnight, and check it again in the morning to be sure I'm still happy with the job.  I am, so the saddle gets boxed up and shipped back to Customer, along with a reminder about proper saddle position.

Today, I received this email from Customer:

"just had to tell you that I went for lesson this past Thursday. it was first time i had used my saddle since getting it back......lots of rain.  We used a new bit and my trainer was so amazed at how happy and light Montana was.  For me it is like riding a new horse!  You must realize, the last time I put this saddle on Montana, she refused to move ( smart horse). she was a very happy camper!!!  I am so grateful for your level of expertise,Kitt you helped me get my horse back!! 

And that, my friends, is why I love this job. To be able to turn something like that around for a horse and rider ... well, I can't think of much that's more satisfying.  

LOCATION, LOCATION, LOCATION

So how do you know where your saddle should sit?  The tree point should be about 3 fingers' width behind the rear edge of the scapulae.  With most dressage saddles, this means that the front of the flap will be about one finger's width behind the rear edge of the scapulae.  With jump or ap saddles, it can be a little harder to tell.  One way to judge is to put the saddle way far forward on the withers and slide it slowly back; it will "stop" at the proper spot.  Another way is to find the tree point and mark the spot on the outer flap directly over it with a dab of leather conditioner, and mark the area on your horse's mane that's directly above the three-fingers-behind-the-back-of-the-scapulae spot with a piece of tape or a chalk mark.  Position the saddle so the two are aligned.  If your saddle won't stay there, or if placing it there makes the rear of the saddle extend past T18, you need to look further into saddle fit.

Sunday, March 30, 2014

Rolex and Other Updates

ROLEX

Guess who's been asked to go to Rolex?

Yup.  Me.  WOOT!

Nikki Newcombe asked me if I'd be interested in coming down to help out at the Bliss of London / Loxley Saddles booth, and since I've never been to Rolex, I jumped at the chance.  I'll be arriving on Friday, and will be there all weekend, and I'm way, WAY excited about it!  If you're going to be there, please stop by and say hello.

UPDATE

In late January, I came down with what I thought was the garden-variety flu.  However, after a week and a half of running a fever, having chills and feeling as though I'd been beaten with a club, I developed the worst respiratory sickness I've ever had, and - the rotting cherry on top the whole miserable sundae - I lost my voice for over a month.  Long story short, I was so sick I couldn't even sit in front of the computer for more than 3 weeks, so I'm playing catch-up like a mad bastard and some of my plans have fallen flat.  Unfortunately, one of those plans was the saddle fitting clinic I'd hoped to do April 11-13 this year.  I'm rescheduling it for later in the year - probably late summer or early fall, depending on availability of the venue - and will update you all as plans develop.  If anyone has a preferred range of dates, please let me know, and I'll see what I can do to accommodate.


Monday, January 6, 2014

Fitting Assessment Photos and Conformation Shots (Throw Me a Bone)

When I'm doing long-distance fitting, I require quite a bit of information from you, my customers.  Since I can't get my hands on the horse and saddle, you have to provide a lot of input and answer dozens of questions.  You also have to provide clear, informative photos so I can see the horse I'm trying to fit, the way the saddle fits the horse and the way the saddle fits the rider.

However, it's come to my attention that there without being able to see exactly the photos I require, a lot is left open to interpretation, and I sometimes get some fairly useless (though sometimes quite interesting) photos.  So in an effort to provide clear, concise guidelines, here are the photos I require ... and a sampling of the photos I don't.

First, a conformation shot of your horse.  All I need to see is the whole horse, weight on all 4 legs, on level ground, head in a normal, relaxed position (no Drama Llama photos, please!) against a fairly plain, contrasting background (no fleabitten greys against dirty snowbanks, and no dark bays against the opening of the run-in shed).

Here are some examples of useful conformation shots:







If I'm assessing saddle fit, I also need a conformation shot of your horse, but with the saddle on:



And a photo of the tree point in relation to your horse's back:


I'll also need to see the same photos, but with the rider up:




Pretty easy.  Remember that it's best to take photos outside when possible, and if the day is overcast, even better - you won't have to worry about shadows obscuring some vital bit of information.  Choose a time when your horse won't be fretting about being fed or being turned out, and when you aren't stressing about getting to work on time or getting home to help the kids with homework. If they aren't exact matches, don't worry - I can probably get the info I need from them as long as you come pretty close.

Now, here are some photos that are of absolutely no help whatsoever.  Please don't send photos like these.  Please, just ... don't.

It's a horse's back.  That's about all I can tell.

"Against a contrasting background" also means no dark bays, blacks or liver chestnuts in dark indoor arenas.


Is this horse standing downhill, is the camera tilted, or is s/he very croup-high?


The Red Menace in her "Drama Llama" guise, standing hip-shot, making her back look even more dropped than it really is.


The pommel clears the withers, but since I can't see the tree point in relation to the horse's back, I can't tell whether the tree width is correct or not.

It's a saddle.  On a horse.  With a white pad under it.  That's all I got.


Remember, all you have to do is come close.  If you send me the info I need, the saddle fitting process will be a lot less time consuming, expensive and frustrating.  And as an added bonus, your photo will never be featured in a rogue's gallery like this!

Tuesday, December 24, 2013

The First Year



Well, I'm pleased to report that Panther Run Saddlery has finished its first year in pretty damn good trim.  In spite of a few nay-sayers, and a few who did their best to throw a monkey wrench into the gears (as Ma used to say), things have gone far more smoothly than I expected, and I have a viable business on my hands.  This is thanks to a huge amount of support from some pretty amazing people:  friends and family, colleagues and fellow fitters, my Constant Readers, saddle companies, and - especially - my customers.  You all have kept me focused and moving in the right direction, and you've proved that continuing to do business "The Edie Way" is the right path to follow.  "Thank you" seems inadequate, but it's all I can say.

So here's wishing you all the peace that this season is supposed to bring, joyful holidays (whatever you celebrate), and hoping your New Year is as good as 2013 was for me.  Looking forward to an even better and busier 2014. Onward and upward!

Friday, November 22, 2013

Having a Fit: Hoop Tree Vs. Standard Tree

As often happens in my life, things seem to come up in bunches.  The latest "bunch" has been Broad Horses and the Saddles That Fit Them (or Don't).  I've gotten several templates lately that look as though someone traced a propane tank.  My last fitting jaunt included 5 horses at 2 different barns who also fit the "propane tank" profile.  And just recently, I was asked by the The Arabian Sport Horse magazine to expand on an article I'd written for their April/May 2013 issue on the particular challenges of fitting the Arab sport horse. Since I was given free rein as far as subject matter, I latched onto hoop trees, since they seem (to my great surprise) to be little known and even less understood.  Since I'm WAY overdue for a new blog post, I thought I'd do a "warm-up" post to get ready to write the article.

If you've read my blog much, you're probably pretty familiar with the hoop (aka Freedom head, Dome, FWB) tree.  If you're not familiar with that type of tree, you can read this post to get the basics about them.  They're designed to "sit down" on a wide back and a lower, broad wither.  On horses with that conformation, a standard tree with an "A" shaped head will perch and be laterally unstable, even if it's the right width.  As a result of this low-profile fit, one of the comments I often hear about hoop trees from fitters who aren't familiar with them is, "It doesn't fit.  It sits too low in front - there's not enough clearance; I can only get one finger in under the pommel when the rider's up."

Here's a shot of a well-fitting standard tree (note that the angle of the tree point and the angle of the horse's back - both marked in yellow - are pretty much parallel):


And another:


There's a good amount of clearance between the underside of the pommel arch and the horse's withers - probably close to the "textbook" 3 fingers' width.

Now, let's look at a hoop tree:


And one with the rider up:




Quite a lot less clearance, right?  Note that the tree point angles are parallel to the horse's back, and note that the underside of the pommel arch is clearing the withers.  Hoop tree saddles are supposed to fit this way.  When fitting a hoop tree, we use the term "adequate" clearance - this means that the balance of the saddle is correct, and that at no time does the saddle come in contact with the withers/spine.

The fitting basics are still the same, no matter what tree type the horse requires.  You want The Heavy Seven (plus the billet configuration) to check out ... you just have a little less room under the pommel arch.

I know it may be unfamiliar to some folks, but it's ok.  Honest.

Thursday, October 24, 2013

Saddle Fitting Course - What We'll Cover

Thought you all might be interested to see a rough outline of what will be covered in the saddle fitting course April 11-13, 2014.  There will be "classroom" theory as well as hands-on work, so come prepared with horse-friendly clothes and shoes (and be prepared for mud ... or snow ... or hot, sunny weather ... or all at the same time; you never know what a Vermont April will bring).  If there's anything you'd like me to cover that isn't listed here, please let me know.

Basic overview: why saddle fitting is being noticed, why it’s important.  Two schools of thought:  UK/SMS vs. “Continental”/Forward Balance.  Why each works … or doesn’t.
  
1) What we try to accomplish when fitting a saddle.
  
2) Identify types and subtypes of English saddles:  cc (equitation, jump, xc), dressage, ap, trail/endurance
            Uses and focus of each
Fit for the rider; how seat depth, blocks, flap length/set affect fit and purpose.

3) Identify parts of the saddles

4) Identify types of panels

5) Identify types of trees (synthetic, spring, hoop/freedom head); purpose of the tree

6) Identify types of flocking, pros and cons of each.

7) Parts of the horse; identify major muscle groups 

8) Why correct fit is important. See #1.How conformation effects fit.  Different conformation challenges (big withers, croup-high, broad back, etc.) and which fitting options work best for each. 

9) Where the saddle should sit, why proper placement is important.  

10) Discuss how to check for back soreness; basics of how to evaluate movement.

11)    Checking static saddle fit – 7 Points including billet placement.  Cover finding rear edge of scapula and T18.

12)    Checking active fit
A)    Cantle pop
B)    Lateral roll
C)    Pad slip
D)    Watch horse and rider – ultimately, it’s up to them.

13)    Taking a template
14)    Taking a conformation photo 
15)    Gadgets:  Port Lewis impression pad, casts, correction pads, pressure pads, etc.

Q&A sessions at lunch and end of each day.


Thursday, October 17, 2013

April 11-13: Saddle Fitting Course

Well, I've certainly been threatening long enough (since 2012, according to this), and it's finally come to fruition (WOOT!!).  April 11-13, 2014, I'll be teaching the long-promised saddle fitting course.  It will be held at the Pullman Farm (former location of the shop where I used to work), 969 Trumbull Hill Rd. in Shaftsbury, VT.  It will start with a meet-and-greet and course overview on Friday evening (times TBA), and will run from 9:30-4 (approximate) on Saturday and Sunday.  The course will cover all aspects of English saddle fitting including saddle types, foam vs. wool, tree types, panel modifications and the conformations they suit, equine anatomy and gait analysis as well as fit for the rider.  The course will NOT teach repairs and flocking adjustments.  Cost is $550.00, which includes lunch/snacks, tools for taking a template and all course materials.  The course is limited to 6 people, and there is a non-refundable deposit of $200 required by Jan 30, 2014 to hold your spot.  There will also be an "on deck" list in case someone drops out.  There are numerous affordable lodging and dining options within 10 miles of the farm.  If interested, please email me at pantherrunsaddlery@yahoo.com.  Looking forward to this!

Monday, September 2, 2013

All You Have to Do is Ask

One of the nicest perks of being a saddle fitter is helping horses and riders find the saddle that works for them.  Another great perk is having a network of other fitters and saddlers with whom to collaborate, exchange ideas and geek on about saddles for hours.  That sort of support and mutual respect is a rare and wonderful thing; I really enjoy being able to ask questions of Wiser Heads, and in return offer whatever info I can.

In the past, I've had other fitters ask to use info and photos from my blog in projects they were doing, and I've always been happy to share, and frankly pretty pumped that folks found my info share-worthy.  I had lots of great mentoring when I began my saddle fitting journey, and I still have great mentors - so I like the idea of being able to pay it back (or forward).  And besides, it's just the kind and right thing to do.

So when it's brought to my attention that people are lifting stuff (and sometimes lifting a LOT of stuff) from my blog without asking, I start leaning toward the bitey side of my personality.  Even if they give me credit, using stuff without permission really isn't legal, and it's also downright rude (which to my mind is the real offense).  Again, I'll mention the little tag (which I know no one ever reads) at the bottom of the blog that says, "All content copyright Kitt Hazelton / Panther Run. Use and reproduction by permission only." 

Perhaps I'm being very naive here.  I know that putting stuff up on the Internet is the equivalent of throwing your valuables on the front lawn and thinking everyone will be honorable and not take anything. But my luck's been pretty good so far, and I'd like to think that things can continue that way.  So if you want to use any of the content on this blog, just ask - that's all you have to do.  I won't growl or bite or refuse - as I said, I like knowing that people find my blog useful.  But lift stuff without permission?  You'll see this side of me:



Sunday, July 28, 2013

Video Tutorial: How to Take a Template of Your Horse's Back

The "how to take a template" video is done and up for public viewing!  Huge freakin' kudos to:  1)  My husband Hasso for his professional guidance in piecing this project together, for shooting and editing it, and for his ability to psychically interpret my harum-scarum gesticulating, barking, hooting, and random input.  2)  To Jessica van Eyck of Northshire Farm and her horse Wanted for all their help, and for providing such a lovely location for shooting.  I cannot adequately express my thanks.  You folks freakin' rock.

Enjoy!